3 Ways To Fix a Leaking Commercial Toilet
Here Are Some Ways To Fix A Leaking Toilet
A leaking toilet can cause severe water damage to your Round Rock, TX, establishment. While you wait for SERVPRO's disaster response team to arrive and fix the damage, you will need to deal with the leak itself. Sometimes the repair is simple, while other times it requires a more complex process. Try the following procedures to get your unit functioning properly again.
1. Find and Fix Minor Problems
While some leaking water or even a puddle surrounding the toilet can feel intimidating, you might not always have to perform intensive toilet repair to fix it. After you use a piece of cloth to absorb the liquid, wait and see if the problem persists. If it does, pinpoint the origin of the leak. The water could be emanating from a defective supply valve, a damaged tank or a supply tube. If these are not the issues, then try to carefully tighten the bolts that secure the bowl to the ground.
2. Remove the Defective Flange
If these steps do not fix the leaking toilet, it is likely a case of a defective flange. You can confirm this theory by removing the toilet. Shut off the water supply and drain the tank. Disconnect the water supply tube from the shutoff valve. Move the bowl to rip off the wax gasket and gently set it aside. Scrape off the remaining wax from the flange and inspect the part. If damaged, replace it with a new flange and a new wax gasket. Place the bowl back, aligning it with the flange, followed by the remaining components.
3. Install a New Toilet
Sometimes the problem with the leakage extends beyond the flange or any single part. If you have an old toilet with outdated components you cannot easily replace or fix, you will need to install a new unit. Just follow the same removal steps and install the new one carefully.
There are many ways to resolve a leaking toilet, from simple fixes to complete toilet replacement. Conduct these steps carefully or call professionals and ensure they follow proper procedures.